Leica DISTO D210XT Laser Distance Meter
- Free Ground UPS
Product Includes:
Producer Inspection Certificate
Quickstart Guide
Printed Safety Instructions
Manual on CD
2 AAA batteries
Handloop
Holster
Leica DISTO D210XT
Manufacturer:
Leica Geosystems
Part Num:
776110
Our Price: $219.00
The Leica DISTO™ D210XTis the most rugged laser distance meter ever!
The Leica DISTO™ D210XT is the only laser distance meter which is protected against jet water, completely sealed against dust (IP65 Certified) and dropped from a height up to 6 1/2 feet to demonstrate its robustness.
The most important features of Leica DISTO™ D210XT
Sealed keypad
dirt can be washed off under running water
Dust-resistant with its tight rubber seal
Drop tests from 2m height due to the Leica DISTO™ DXT's robust rubber jacket
Impact-resistant housing
reinforced with fibreglass plastic bracings
Hard-wearing 4-line display
illuminated to allow measuring in the dark
Multifunctional end-piece
with automatic position detection for measuring out of corners and from edges
DISTO™D210XT has the following measuring functions:
Continuous measurement, tracking
suitable for staking out any distances
Minimum distance measurement
Allows horizontal or vertical measurement in which the shortest distance is displayed
Maximum distance measurement
Allows diagonal measurement into corners in which the longest distance is displayed
Plus, minus
Distances, areas or volumes can be added or subtracted
Area and volume measurement
The area or volume is automatically calculated from two or three measurements (length, width, height). Supplementary information such as skirting length, wall area, floor or ceiling area is displayed at the touch of a button
Pythagoras functions Allow distances to be determined when direct measurement is impossible. The distance is automatically calculated from two or three measurements.
Feature/Benefits
Feature
Benefit
IP 65: Dust tight and jet water protected
Ideal for everyday use on rough construction sites
Massive rubber coating
Protects sensitive optic and measuring engine (has to pass 6 1/2 feet-droptest!)
Multifunctional end-piece with automatic position detection for measuring out of corners and from edges
Avoids errors because no manual selection of end-piece position is necessary
Sealed keypad
Easy to clean under running water
Volume/area with total room data (ceiling area, circumference, wall area)
Quick estimations without the need of a calculator possible direct at the jobsite
4-line display
End-user sees all results (e.g. volume) at a glance
Display with illumination
Measuring at dark is no problem
Pythagoras function: indirect measuring of heights or widths
Can measure in situations where direct measuring is not possible
Recall of last 10 measurements (Historical storage)
Make 10 measurements and then write down all together in your plan – it is time saving
How to change batteries of DISTO ™ D210XT? Fold out the end-piece and open the locking mechanism with a coin or a screwdriver and lift the battery compartment cover. Insert batteries, observing the correct polarity. Close the battery compartment carefully. To ensure the instrument remains watertight, any dirt on the battery compartment seals should be avoided.
How to use the multifunctional end-piece? The device can be used for different measuring situations: For measurements from an edge, open the positioning bracket until it locks in place.
For measurements from a corner open the positioning bracket until it locks in place. With a slight push to the right the bracket can be turned further. A built-in sensor automatically detects the orientation of the positioning bracket and calculates the corresponding distances accordingly.
How to switch off/on the beep? The beep can be switched off (and on) with a long press simultaneously on minus key and reference key ( ).
How to switch off/on the display illumination? The illumination can be switched off (and on) with a long press simultaneously on plus key and reference key ( ).
Which formula stands behind the indirect measuring function Pythagoras?
In any right triangle, the theorem of Pythagoras is valid: a²+b²=c². This means the other way round: c=radical of (a²+b²) or b=radical of (c²-a²). One side of the triangle can be calculated, if the other two sides are known. Therefore it is important that the DISTO™ measuring points are at the same level and that measurement 2 is right angled. With a long press on the DIST-key the minimum function can be activated to get the shortest distance for measurement 2.
How can I clean the DISTO™ D210XT? The device with keypad and display can be easily cleaned under running water. Attention should be taken, that the water-jet is not directed onto the optical lens. If water is on the optical lens, it should be removed with a soft cloth.
How can I get an extra year’s warranty for the Leica DISTO™ D210XT? Our standard warranty of 2 years can be extended by one additional year if you register your device on our website www.disto.com within eight weeks of the purchase date. If the product is not registered a two year warranty applies.
Which Leica DISTO™ is the right one for me?
Function
Leica DISTO™ 210XT
Leica DISTO™ D2
Leica DISTO™ D330
Leica DISTO™ D330i
Leica DISTO™ D5
Leica DISTO™ D8
Distance measurements, including area, volume and continuous measurement
Addition and subtraction of distances, areas and volumes
Indirect height and distance measurement to inaccessible places
Automatic calculation of room dimensions e.g. wall and ceiling areas
Measurement of tilts
Measure horizontal distances, even past obstacles
Determine the area of a multi-cornered room
Check a rightangled room corner
Target far-off objects in very bright conditions using the digital Pointfinder
Measurement of roof slopes and facade areas
Measure heights without a reflection point
Measure the roof slope or pitched objects from remote distance
Determine spot heights and ground profiles
Particularly robust, dust tight and protected against jets of water
Data transmission by BLUETOOTH® Technology
Warranty Information: 3 Year Warranty - if registered within 8 weeks after purchase with Leica
We repair
most brands of construction lasers and instruments.
Lasco,
Inc. Laser and Instrument Company offers a full service repair department
with factory-trained technicians. Lasco’s repair facility is one
of the best equipped in the country. Our experienced technicians can
provide expert service for almost any brand of construction laser, level,
transit, measuring and machine control equipment.
Lasco is an approved warranty and non-warranty repair center for many
of the major laser and instrument manufacturers.
Simply
complete the Repair
Service Form and return with your instrument for repair or call
us today at 1-800-722-9704 for repair information. We
have been repairing construction lasers for 30 years!
AGL, Apache, Berger, Bosch, Calculated Industries, CST, David White,
Digipas, Johnson Level and Tool, Keson, Laser Alignment, Laser Reference,
Leica, MD Building Products, Nedo, Nikon, Northwest Instruments, PLS,
Schonstedt, Sokkia, Spectra Physics/Trimble and Topcon.
We
Offer Educational Discounts Call Us For More Information
1-800-722-9704