AGL SmartRod - Laser Receiver Built into a Telescoping Rod

SmartRod

- ALL IN ONE: rod + receiver + digital distance meter
- Direct digital readout of your measurements from 1m up to 4m
- Digital Cut and fill
- Works with any traditional rotating laser

The SmartRod is a laser receiver built into a telescoping rod, with unique features that eliminate the usual calculations required when using a receiver on a grade rod. It provides a digital readout in three modes: basic elevation readings, cut-and-fill calculations, and height and width measurements (tape measuring mode, not requiring a laser). It can receive reference elevation information from all rotating lasers.

Features

- LCD showing elevation, measurements, settings, and status of functions
- Cut-and-fill mode that indicates how far a measurement is from a previous reference reading
- Choice of units: metric; ft/10ths/100ths; and ft/inches/16ths
- Uses linear receiving technology and has a wide 165mm (6.5”) reception range for capturing the beam quickly.

Technical Specifications

Reference

775210

Product Name

SmartRod

Working Radius

1m - 300m (3ft - 1000ft.) laser dependent

Detection Accuracy

±2.5 mm (±3/32in)

Range of reading

Elevations from 0.99m (3.2 ft)

to 4.02 m (13.2 ft)

Choice of units

• Metric

• Feet/10ths/100ths

• Feet/inches/16ths

Beam capture angle

120° minimum

Beam capture height

165 mm (6.5"), dependent on laser and distance

Detectable laser beam

Visible and infrared
(610nm to 780 nm)

Power supply/battery life

for min. 3000 measurements

Control panel:

(3) AA batteries for min. 60 hrs

Laser receiver:

(3) AA batteries

Standby of capture mode

After 30 seconds (no use)

Automatic shut-off

After 5 minutes (no use)

Operating temperature

-10°C to +50°C (14°F to 122°F)

Storage temperature

-40°C to +70°C (-40°F to 158°F)

Weight

3.6 kg (8 lbs.)

Dimensions Total extended height

4,07 m (13.4 ft.); closes to 1,15m (3.8 ft.)

Environmental

IP54 for water and dust resistance

We repair most brands of construction lasers and instruments.

Lasco, Inc. Laser and Instrument Company offers a full service repair department with factory-trained technicians. Lasco’s repair facility is one of the best equipped in the country. Our experienced technicians can provide expert service for almost any brand of construction laser, level, transit, measuring and machine control equipment.

Lasco is an approved warranty and non-warranty repair center for many of the major laser and instrument manufacturers.

Simply complete the Repair Service Form and return with your instrument for repair or call us today at 1-800-722-9704 for repair information. We have been repairing construction lasers for 30 years!

AGL, Apache, Berger, Bosch, Calculated Industries, CST, David White, Digipas, Johnson Level and Tool, Keson, Laser Alignment, Laser Reference, Leica, MD Building Products, Nedo, Nikon, Northwest Instruments, PLS, Schonstedt, Sokkia, Spectra Physics/Trimble and Topcon.

We Offer Educational Discounts Call Us For More Information
1-800-722-9704